I will have to give it a shot, though I am still pessimistic. I was kind of turned off by the whole Pocket or whatever advertisement thing it wanted to enable. Vivaldi has been fine for me so far.
She/They
I will have to give it a shot, though I am still pessimistic. I was kind of turned off by the whole Pocket or whatever advertisement thing it wanted to enable. Vivaldi has been fine for me so far.
Wait, is that actually Garbage? That was the first thing that popped into my head when I saw the picture. That Bond music video she did was awesome. World is Not Enough.
Sorry, didn’t make it home until today and not sure if you get notifications on edits. You will need a monitor and keyboard hooked up to your server as you will not have ssh access until the network config is “fixed”. I would do the below with the GPU removed, so you know 100% that your networking config is correct before mucking about further.
Add a /etc/systemd/network/99-default.link
with the below contents.
# SPDX-License-Identifier: MIT-0
#
# This config file is installed as part of systemd.
# It may be freely copied and edited (following the MIT No Attribution license).
#
# To make local modifications, one of the following methods may be used:
# 1. add a drop-in file that extends this file by creating the
# /etc/systemd/network/99-default.link.d/ directory and creating a
# new .conf file there.
# 2. copy this file into /etc/systemd/network or one of the other paths checked
# by systemd-udevd and edit it there.
# This file should not be edited in place, because it'll be overwritten on upgrades.
[Match]
OriginalName=*
[Link]
NamePolicy=mac
MACAddressPolicy=persistent
I forget if you have to reboot, but I am going to assume so. At this point, you can get the new name of your nic card and fix your network config.
ip link
should list all of your nic devices, both real and virtual. Here is how mine looks like for reference, with the MAC obfuscated:1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enxAABBCCDDEEFF: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master vmbr0 state UP mode DEFAULT group default qlen 1000
link/ether AA:BB:CC:DD:EE:FF brd ff:ff:ff:ff:ff:ff
3: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether AA:BB:CC:DD:EE:FF brd ff:ff:ff:ff:ff:ff
You will need to edit your /etc/network/interfaces
file so the correct card is used.
/etc/network/interfaces
, just in case you mess something up.sudo vim /etc/network/interfaces
(or whatever text editor makes you happy)
It will need to look something like below. I have to have DHCP turned on for mine, so your config likely uses static. Really all you need to do is change wherever it says enp yada yada to the enxAABBCCDDEEFF
you identified above. source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
iface enxAABBCCDDEEFF inet manual
auto vmbr0
iface vmbr0 inet dhcp
#iface vmbr0 inet static
#address 192.168.5.100/20
#gateway 192.168.0.1
bridge-ports enxAABBCCDDEEFF
bridge-stp off
bridge-fd 0
sudo systemctl restart networking.service
Hopefully at this point you have nework access again. Check the below, do some ping tests, and if it doesn’t work, double check that you edited the interfaces file correctly.
sudo systemctl status networking.service
will show you if anything went wrong and hopefully show that everything is working correctlyip -br addr show
should show that the interface is up now.lo UNKNOWN 127.0.0.1/8 ::1/128
enxAABBCCDDEEFF UP
vmbr0 UP 192.168.5.100/20
At this point, if all is well, I would reboot anyways, just to make sure. If you add any GPUs, sata drives, other PCI device, disable/enable wifi/bt in the BIOS, or anything else that changes the PCI numbering, you don’t have to worry about your NIC changing.
I am not at home, but what I did was change the 99-default.link file. I found this from the two pages below. https://wiki.debian.org/NetworkInterfaceNames#CUSTOM_SCHEMES_USING_.LINK_FILES https://wiki.debian.org/NetworkInterfaceNames
Basically, by doing this, your nic cards will be forcibly named using the mac address:
#/etc/systemd/network/99-default.link
[Match]
OriginalName=*
[Link]
NamePolicy=mac
MACAddressPolicy=persistent
Afterwards, you will need to reboot and then update your network config file to use the correct names. I don’t ever change the network config with the GUI in proxmox as it has wrecked it too many times. I will update this reply again later with some more information on what to do.
Hey, you ok? I am not ok today, but I definitely don’t want to fill my skull with bullets. Go wash your sheets/bedding. For whatever reason, clean sheets are the best.
I changed my settings to name nic cards by mac address instead of the enumeration as I got sick of the name changing when I would add/remove pci devices.
In a similar train of thought, have you tried having (good) orange juice with Mexican food? I used to love having it once in a while when we brought home Rosa’s. Never did at a restaurant. Not a complete heathen. 😁
It looks like with multiple power cubes you can break it up. My favorite thing about the switch is the separate joy cons. This is far far far less painful for me to hold than traditional controllers. If this worked on Linux, Mac, PlayStation, and my Steamdeck, I might try it, as long as I could return it if it doesn’t work out.
I struggle with buttons in general. My palms are too small so I can’t wrap my hand around them very well. I have to death grip with my palm or I drop it, but I am constantly shifting around as my fingers can’t reach certain things easily either. The off-axis joysticks on an Xbox controller is a no go as I have to hold the controller rotated a bit which means that up isn’t up. I do much better with PS5 controllers, but still get a lot of pain in my hands if I play too much.
I lucked out. Success at last! Now I can continue to code furiously doing things I know how to do.
Been there. Done that. FML on searching for programming help some days. Versioning is a nightmare as the way you “used” to do things is no longer relevant and the rest of the results are some asshole saying it is a duplicate question that was answered 10 years ago…that is no longer fucking relevant!
Sorry. Yesterday sucked. I hope today is less frustration and more things working like they are supposed to.
I use this on all on my Pis. It just works. I like the text config file for headless installation and how you can even add scripts to run on install too.
I never considered old DOS games until now. Thank you!
I think I vaguely remember something about that, but I would be pretty upset if the keyboard navigation was unusable. It is almost as bad as the stupid mouse enabled BIOSs that never work. It doesn’t even work on the Dell laptop I have for work. The keyboard navigation is always extra special in those cases and involves a lot of button mashing to get to the correct thing, if I can figure it out at all.
I don’t use wired mice either and had to dig the old gaming mouse out recently so I could get to some menus on a new machine to pair the mouse. I have done the mouse pairing thing through console and it isn’t the best experience, especially if you are trying to figure out if things are working in the first place. For me, I could figure it out. For a new user, you are asking a lot.
Just give me an old school OS installer with simple menus, easy keyboard navigation, and the bare minimum guidance needed to not entirely fuck it up.
The best was on arch because I had no idea how to use pacman, which I needed to install man, when I needed how to use pacman. I will have to take a look at tldr. I mostly use Debian without a desktop environment, but have an Arch VM for gaming here and there. Works out.
I get confused every time I install a distro and man isn’t installed by default. I guess I get the bare minimum philosophy, but it throws me off every time. First thing I install is vim, man, git, and probably a couple other things I can’t remember right now.
I do like a decent man page that has examples for us dummies and I have found that they have improved a lot over the years.
Like other posts, Factorio. You will lose sleep. Set timers…
Proton and Vulkan make most things easy-ish if you are using Steam. Note that there is a little properties button on the game page that you probably need to use to force it to use Proton so it will install. Proton DB is your friend. Lutris + Wine is pretty good too. Proton is just Wine with enhancements.
You may find Helldivers a lot of fun too, especially if you can play with friends. It is suitably ridiculous in the best way and is sort of human vs aliens/robots. All of the humans (us) play on co-op teams to bring Democracy to the universe. There is a game master from the company that makes it that is leading the war against us. Like I said, suitably ridiculous. Most of my friends are playing it nightly and it will be a big part of our LAN party this weekend.
Ok. I tried Firefox for about a month on my Android phone and Mac, but unfortunately had to go back to Chrome on both. I don’t really know what to do at this point. I run enough firewalls and ad blockers that using Chrome has never particularly bothered me from a usability standpoint, but I get the point everyone is trying to make. However, I also don’t want to spend weeks of my life fighting to get yet another open source program to work the same as the “other” program, or find some substitute that I can live with.
I used to use Firefox when I was a kid and loved all of the extensions. However, it seems severely lacking now. I tried to find something to give me group tabs, and found old abandoned projects or some tree thing that made 0 sense to me. I saw an article I think explaining that it is coming? I don’t understand why a feature like this is missing when it used to exist a long time ago. Seems like basic functionality to me. Also, why is the tab bar so big? It takes up a lot of screen real estate.
The thing that killed it for me was the lack of PWA support, which is how I have used Outlook for around 6+ years. I fought with the extension for a while and things sort of worked on and off for a few days here or there, but half the time it would open emails in the main browser anyway. Once it got to the point where Outlook was completely blank and refused to load at all, I gave up. I could never get it to work again. I hoped I could maybe setup the PWA to just be in Chrome or Safari, but it just opens it as a tab in Firefox anyway. I tried, but I am not going to spend hours fighting with it anymore at this point and it would be nice if it was built into the browser instead of a random extension.
It was a better experience on the phone, and I like the bar on the bottom, until I realized it was draining my battery. I found a thread of users complaining about it for the last few months with no fix. I don’t even use the sync feature, but that supposedly is the culprit? Phone kept dying and I barely used it. Looked at the battery usage screen and there it was, almost the top item. I would love to use Firefox on Android, but not at the expense of my battery. Sorry.
I usually look at their GitHub or what have you to see if there are packages or instructions there. I have been able to solve most issues this way. Otherwise I see how much of a bitch it will be to compile from source. Depending what it is, I also check to see if there is a docker image instead.
I will happily defend you on this point. Down vote away people. As long as you don’t shove past the rows in front of you or bonk me with luggage, we good. I try to remember the passengers who had to store luggage father back and see if I can get it passed forward. I will totally boss people to sit back down if someone needs to get to the front ASAP due to close connections. If it is going to be a while, I will try to grab my backpack and sit back down.
Now, people with oversized rollerboards? Yeah. I get pretty irritated over that and the vast number of issues that causes with boarding and deplaning. The airlines make it worse with price hikes. I personally check all of my luggage and rarely run into issues. If I have any major concerns I will throw a couple things into a bag that will fit under my seat or FedEx it if we are really going there.
I had to change mine to mac address naming on my proxmox server after the second time the name changed due to a GPU or SSD being added. It was kind of like, so what, if an SSD dies suddenly or I have some issue with a device you are going to rename my fucking nic card again while I am trying to troubleshoot? Absolutely deranged.