Yeah. They’ve done a good job. Strategically its so that Steam can’t easily be crushed under Microsoft’s enormous boot. So it’s a good forward-thinking commitment that everyone can benefit from. (Everyone except Microsoft, I suppose.)

My latest favourite is missing: Note Taking Apps:

• xournal++

Joplin is good for organising text-based notes, so I’m not surprised to see that on your list. But xournal is a for mixed drawing / hand-writing / text, etc. So it’s a different use-case to Joplin. (It would be perfect if Joplin supported xournal notes; so that you could write with xournal and then organise with Joplin. … But that hasn’t yet come to pass.)

Using full names like that might be fine for explaining a physical rule, or stating the final result of some calculation - but it certainly would be cumbersome and difficult for actually carrying out the calculations. In many cases we already fill pages with algebra showing how things can be related and rearranged to arrive at new results. That kind of work would be intractable with full word names for the variables, partially because you’d be constantly spilling off the end of the page trying to write the steps; but also because having all that stuff would actually obfuscate what you are trying to do - which is algebra. And during that process, the meanings and values of the pronumerals is not as important has how they interact with each other. So the names are just a distraction.

For setting up an equation, and for stating the final result, the meanings of the variables are very important; but during the process of manipulating the equations to get the result you want the meanings of the letters are often ignored. You only need to know that it is something that can be multiplied, or inverted, or subtracted, or whatever. Eg. suppose I want to rearrange to get the velocity. I don’t care that I’m dividing both sides by the air density times the drag coefficient and the area… I’m just dividing ρCA, which is an algebraic blob whose interpretation can be saved for some other time.

There are real problems transgender people are having, ladybird browser must be low on that priority.

Are you trying to tell me that Ladybird inadvertently referring to a computer process ‘he’ instead of ‘it’ is not a high priority problem for transgender people? What could possibly be worse? :p

(But seriously though. I find it really weird that people are still upset at Ladybird about this. It makes me wonder if there’s some social manipulation going on. Like, is anyone actually upset about this, or is it just an excuse to attack the devs?)

Is this because they used “he” instead of “they” in the build instructions? … They changed that and acknowledged the mistake. Surely that’s enough. It’s the fucking build instructions. I think we can probably find it in our hearts to forgive them.

[edit] Just in case people think I’m joking. I’m not. As far as I’m aware, the critical incident that that has resulted in people calling Ladybird devs anti-trans is that they wrote ‘he’ instead of ‘they’ in the build instructions. That’s what caused the original outrage. And as far as I’m aware, there have been no other incidents. But please, if there is something of substance that I’m not aware of, post about it here.

We aren’t talking about security though. We’re talking about what information should be presented on lemmy.

Let me put it this way: have you personally ever tried to see who upvoted or downvoted a particular lemmy post? And if you did, did you talk about what you saw?

My point is that currently basically no one sees the data. The expectation is that no one is looking. And it is not socially acceptable to discuss who is voting for what. But if the votes were changed to public then everyone would see it, the expectation would be that it is common knowledge, and so obviously it will be discussed. Is that what we want on lemmy?

I’m seeing lots of comments here saying that server admins can already see vote data, and therefore it is not private.

But from my point of view, having a handful of people able to extract voting data using their position of trust on the lemmy network is very different from broadcasting voting data to everyone on lemmy. And although you can argue that it is possible to create a new server and federate and blah-blah-blah to view votes; that argument sounds to me like “don’t bother locking your front door, because that type of lock can be defeated by a lock-picking tools.”

And even aside from all that discussion about who can access what; there is another key point that I think is overlooked: Making voter information public makes it ‘normal’ thing to monitor and discuss. Currently there is an expectation that people won’t look at or discuss that information (even if they hypothetically could get access). But by making it public, the expectation then is that everyone will look at that information. That would create a change in tone and meaning of votes and discussion around votes.

Sure. I very much like having offline installers too. I’ve got a heap of them saved on my computer, and on an external drive. But Lutris and Heroic Games Launcher are clients. So I’m not really sure what you mean.

Thanks for the info. That sounds like a decent system. The idea of unpacking into a place of my choosing, and running without an additional launcher kind of appeals to me from a software-simplicity point of view - even if installing the game is slightly more hands on. But I don’t think I’ll do it that way myself, mostly because I don’t really want to further entrench Steam. Valve does a lot of good stuff … but their dominance in this space still makes me uncomfortable. (And the fact that they don’t let you disable the “what’s new” advertising bar on the library page is a big red flag for me.)

When I was first getting started, I briefly tried Lutris - but was put off by two things. The first was that it felt very complicated. I was new to Linux at the time, and I’m being asked helps of config questions about how to install which-and-what components in order to use such-and-such runners or launcher or whatever… basically just a heap of stuff that I didn’t really understand. And when I tried using a recommend ‘gold rated’ auto-setup to install something, it just froze. So that was disappointing. I decided that maybe I’d try something else.

I’ve seen Lutris recommended in a lot of places; so apparently it’s pretty good. But at the time I used it, it wasn’t really what I was looking for. I think a lot of people praise Lutris for the way it lets you have case-by-case special configurations for all sorts of things, which might allow you get some stubborn stuff working. But for me, it felt like more things I could break. I’ve got enough games that I’m happy enough to just say that if it doesn’t work then I won’t play it. So I guess Lutris wasn’t for me. [edit - Bottles also had a lot of config choices to get started; but I was lucky enough that what I picked worked first time; and I haven’t looked at the config since.]

That sounds like a similar setup to what I’m doing; just using proton-ge rather than bottles. Perhaps your way is a bit more light-weight, which is probably nice.

Heroic does seem to have jumped in popularity recently. I’d never heard of it when I first started installing games on Linux.)

Does the comet support mean that it can also do Galaxy cloud-saves and achievements? I wouldn’t say those things are super important to me, but it would make switching between launches easier - since I wouldn’t have to stuff around trying to move save files to the right place after switching.

I’m more than happy to just download the installers, and only manually update. That’s how I use to do it when I was using Windows. But the installers don’t run natively on linux, I’m just not sure how best to use them. My first attempt was to use bottles to run an installer, then again to run the game after it installed. That worked - but after doing it once I decided that it would be easier to just install Galaxy instead so that I don’t have to setting things up over and over.

I’m curious about how Steam responds to you adding a non-steam game like that. Are you using innoextract to unpack the files from the installer into some personal directory, and then telling Steam to run the game from there? Or do you tell steam directly to run the installer? … And when you add a non-steam game to steam is that an entirely local thing? (I don’t really want to be reporting to Valve about what GOG games I’m playing.)

I see one advantage of using Steam is that if I already have Steam, then it saves me installing another tool. But some disadvantages is that it presumably won’t do save syncing, or Galaxy achievement tracking - and the installation process for each game might be a bit fiddly by the sounds of it.

I’m half-way through the survey right now; and rather than continuing, just stalling because I don’t want to rank another set of three options that I don’t care about. Some of the choices already given were like “well, I guess I’ll pick the feature that I’ve at least thought about using once…” but now it’s just a list of 3 things that I don’t want whatsoever. I’m trying to give useful feedback, but I feel like I’m really just giving noise.

Widelands is a great strategy / building game. The gameplay and UI style is a niche - but that’s one of the things I like about it. It’s doing something different to most games.

(The gameplay is similar to Settlers 2; before that franchise changed direction.)

[edit] But the open-source game I’ve spent the most time playing would be OpenXcom-extended, with xpiratez. That game is truly huge.

CrossCode is fantastic. But it is not an open source game.

In many ways, the silky-smooth convenience offered by modern computer software makes everything much harder to learn about and understand. For anyone that used zip files before this Windows feature, the problem is obvious - but for younger people it’s not obvious at all. Heck, a lot of people can’t even tell whether or not a file is locally on their computer - let alone whether it is compressed in some other file.

I hope that Ladybirdy gets something good happening. I simply having a another browser in this space would give Mozilla a good sanity check for their direction and values. Otherwise they’re just kind of fumbling around.

I’m starting to worry about Mozilla. Firefox is still the best browser, and I’ve used it for many years… but there are more and more anti-features popping up that require a few settings to be changed. No one thing is a big deal, but I’m starting to feel the same way about Firefox as I did about Windows before I stopped using it: like it’s just trying to trick me into doing something I don’t want to do rather than aiming to be a good product.

I’m thinking specifically about the address bar getting ‘search suggestions’ from Google by default; and the special ‘ad effectiveness tracking’ that is turned on by default to help Facebook. Privacy should always be the default setting. We shouldn’t have to keep up-to-date with the latest features and settings just so that we know what to disable!

When writing my previous post I had started writing a list of suggested strategies; but I changed my mind about posting that. I’m not a member of Mozilla. I don’t know what particular challenges they face, and my expertise are not in not-for-profit fundraising. So although I do have ideas, I don’t really want to get into a trap of trying to defend my half-arse ideas against people picking them apart. It’s beside the point. The point is just that it is achievable, as evidenced by other organisations achieving it.

I will say though that they could at least just mention on the Firefox ‘successful update’ page that Firefox is supported by donations, and give a link. A lot of people really like Firefox; and I think that if Firefox asked for donations, they would get more donations.