This is still not a thing???

Serious question. Why? No, for real, why? Why are these hard to understand editors still the default on most distros and flavors? Why haven’t they reinvented themselves with easier to understand shortcuts?

I get the feeling my comment will attract heat, but I’m a web dev, studied comp Sci for years, have worked for nearly a decade and have spent over half my 30 year old life using computers of all sorts. I’m by no means a genius and I by no means know enough about this or most tech subjects, but I literally only knew how to close vim with and without saving changes in a recent vim encounter, purely due to a meme I saw in this community a few days prior, and I had already forgotten the commands by the time I saw this post. Nothing about vim and alternatives feels intuitive or easy to use, and you may say it’s a matter of sitting down and learning, which you can argue that, but you can’t argue this isn’t a bit of a gatekeeper for people trying to dip their toes into anything that could eventually rely on opening vim to do something.

I won’t try to deny its place in computer history, or its use for many, or even that it is preferred by some, but when every other software with keyboard shortcuts agrees on certain easy to remember standards, I don’t quite understand how software that goes against all of that hasn’t been replaced or hasn’t reinvented itself in newer versions.

Then again, I have no idea what the difference between vi, vim, emacs, and nano are, so roast away!

I’m in this exact same boat and I don’t love it. I don’t know if my ADHD is acting up or if YouTube has made my productivity take a nosedive (got fired a month ago due to it), but I can’t help myself from watching hours of YouTube a day. I feel like reddit was at least easier to disengage from in order to be productive.

I’m too retarded to understand SMART values so, I 100% have read errors on them, I have no idea what the numbers mean, though, so I can’t say how bad it is. I don’t see critical failures or unrecoverable errors being reported on them, so I don’t sweat it too much.

You can get 20tb seagate exos drives for ~$15/tb on ebay, sometimes on Amazon as well.

I was also on the fence. Ended up jumping into it all a few months agk, and my plex server went from a very small and informal media repository that a few friends kept nagging me about because I always procrastinated downloading, categorizing, and adding media to it, to now a vast collection of thousands of movies and hundreds of shows, spanning about 50 users, around 40TB+ of content (which reminds me I need more drives soon…) and everyone requests whatever they want. There’s still work to be done, there always is, especially if your server grows and your peers start using it (wait to see that one person start requesting Korean stuff that never gets found automatically), but it’s a night and day difference for me, and the organization of it all helps me concentrate and tackle stuff quicker.

So the stack usually goes like this:

-sonarr, radarr, readarr, lidarr, etc. : they each specialize in a media format (series, movies, books, music, respectively), they will fetch Metadata from known Metadata sources, and will perform searches on whichever indexer you like (think piratebay for torrents, or nzbgeek for NZBs from usenet). They’ll connect to your download client and send torrents and NZBs to be downloaded, will know if a download fails and search again, and will import completed items automatically. They’ll organize everything, rename everything, and keep track of quality with constant upgrades to your media by parsing RSS feeds from said indexers. They won’t go out of their way to downloading things you didn’t ask for, you have to ask for everything. You can monitor collections for movies on radarr if you want future movies, but that’s about it as far as waiting for new content not explicitly requested.

-overseerr, requestrr, etc. : these are front ends that you can share with your friends and family. You only need one. They’ll be able to search for content as well as browse trending or new contenr, see if it’s in your library, request content, and follow the progress of the requested content. No need to tell anyone “this isn’t done yet”, they can just check what’s available and whatnot, and you can designate request quotas per user and decline requests.

-jackett, prowlarr, etc. : these helper services will make it easier for you to keep track of your indexers. They’ll communicate with the content handling arr services to provide them all the indexers they need. You only need one. You set them up once on these services rather than once for each arr service. They also have the ability to perform better manual indexer searches than the main arr stack services.

-honorable mention, bazarr: this little fella will integrate with your arr services to monitor all media and download subtitles for it all, set to your standards. It even has the ability to use a WhisperAI server (speech to text LLM developed by openai) as a source for subtitles, so you could create your own subtitles if you don’t find any. Of all of them, I find this one to feel the jankiest, but it does a decent enough job, even if not perfect by a long shot.

There’s other services that I haven’t messed with. For instance, there’s Tdarr which is used for automatic remuxing and conversion of media files to whichever format you prefer, in order to standardize your entire library. I feel like this is a destructive service that could easily backfire if I’m not careful (say, HDR H265 conversion to H264, buhbye dynamic range and color accuracy forever on that file if you don’t provide an accurate tone mapping which is usually not a one size fits all thing, so a lot of intervention anyway) , so I’d rather not even risk it.

Almost everything can be thrown into docker containers, and you can find some pretty decent guides on YouTube by searching for these services one by one. After the first one, you’ll get the gist of it all I think. Bazarr runs as a service (at least on windows) and has some bug with its front-end sometimes, which requires you to restart the service to get into the page at all, though apparently setting the service to delayed start fixes the issue, which I did and haven’t run into this bug since, so something to keep in mind.

As others mentioned, there’s guides to setting up qualities, filters, exclusions, and priorities on your content, and trash guides are usually where you go for that. I find that trash has a high standard for quality, which will eat through your storage like a bodybuilder eating 20 eggs for breakfast in a single seating, so you will always have to play around with your preferences and it will take some time to get things just right (some edge case scenarios on content are hard to spot at first, but you’ll get that one download of a very questionable release that will make you tear your hair off for a bit), but it will get better as you tinker around.

So to summarize, if you have even a little bit of trouble maintaining your media repository, these are a must. Even if you don’t, the process of searching stuff, downloading stuff, renaming and categorizing stuff, and then checking that everything is OK on plex by comparing stuff on thetvdb and whatnot, its a lot of time-consuming work even if you don’t notice it, and all of it can be automated by the arr stack easily. I have a couple of friends helping as admins of it all, and they’re just as freaky on management as I am, so we all just work together to get everything right, and it’s really helpful and easy to go down this route. Good luck and have fun!

Ah, final tidbit, if you don’t yet use the usenet, this is the moment where you will realize you have to spend money on it because it’ll help that much more than torrents once your arr stack is going at it. I’m at two usenet indexers and I think two usenet content providers. I want more. Help.

I feel like I don’t really care what my peers use, or what people in general use, but the more adoption linux desktop gets, the more people getting involved in community projects there are, as well as more bug reports and the like, so the sooner things get improved upon and the better they become.

I mean I’ve been a pirate for a WHILE and you generally do see ads on opensubtitles subs. Generally it’s opensubtitles saying you can advertise with them, or credits for subtitles that stay on the screen for way too long, but this has been a thing forever now, I don’t recall a time when this wasn’t done.

I don’t think I can take the moral high ground on it seeing as…well, I am a pirate lol. We out here doing our best to stay afloat, opensubtitles included.

As someone who is looking into having a nextcloud server running in the near future, may I ask why?

Honduran here. Didn’t know this survey happened, would have loved to get my country in there!

Ran into double clicking issues on my two G903s, eventually ended up putting some aftermarket switches on the second one. They would be the YIMAGUJRX RUNJRX Red Kaith GM 4.0 Mouse Micro Switches on Amazon. That was 2 years ago, longer than either of the two G903s lasted (and I did swap my first G903 switches with some Japanese omrons from Muccus brand, but they ran into the same issue after a while), so you might want to look into whether the G604 can use them. It’s ridiculous that the end user would need to end up learning how to solder and get soldering gear to fix a high end product after a year…twice…but here we are.

As for the Onboard Memory Manager, I’ll have to look into that one. I hate having to have GHub running lest I want a rainbow mess and no macros on my G903.

Ah, my bad, I’ve never owned or looked into a G915 but just looked for a picture to make sure it was type c.

God, I hate everything. Type C was meant to make everything easier, not fuck us over with non-standardized proprietary versions from every fucking manufacturer.

Pretty sure if you fire up Logitech Options right now on one of your devices with a receiver plugged, in you should see this pop up. On a skim through Google, it seems like they added this about a month ago or so.

As I learned once I started using it with Bluetooth, Bluetooth devices don’t work during POST, so I’ve had to have a secondary wired keyboard at hand for whenever I go into the bios.

Other people on the thread have commented that it’s actually due to Firefox not implementing WebUSB due to security concerns, so it is technically a valid message, but for the wrong reasons. Why the hell does this need to be a web app?

It works through Bluetooth just fine, I just never got it to work with the USB receiver (I was trying just now, still no dice). The app also works just fine if you click cancel.

I went through two G903s due to bad switches which would fire multiple clicks per physical click. Ended up buying aftermarket buttons for the second one and it’s been great. Now I wish I had other options for mice; Logitech was the only brand to bring a very nice solution for wireless charging mats to the market, and as far as I know they’ve been unchallenged in that. I’m stuck in the Logitech ecosystem due to that powerplay mat, but I guess as soon as my G903 dies for good, I’m ditching it and trying whatever else I can, knowing full well it will be a downgrade coming from my current setup. It’s a painful realization.

Oh it does. Neolibs looooove privatization. I’m from Honduras, where the modus operandi is to drive public entities to the ground from the inside in order to justify privatization, and then just pretend it’s doing its job while corpos and politicians line their pockets. We’re currently under a leftist government, and one of the first steps it took was to retake control of the energy sector, since it got privatized and sold to a Colombian company, a stunt that ended up in millions in debt and led to a mud fight between the private company and the government, which resulted in, among all the lawsuits back and forth, constant country-wide blackouts during a few months this year. It’s the first leftist government in over a decade, and it’s admittedly not doing great (we really don’t have our shit together), but people here tend to forget we were sold a capitalist dystopia dressed up as a utopia, by a druglord-president that’s currently holed up in NY over drug and arms trafficking charges.

Well from some quick reading online, it’s not for downloading drivers. It’s literally an internet service Logitech is forcing its users to use in order to connect their peripherals, it’s insane.