Always happy to see more RSS-related tools emerge!

But isopropyl alcohol and enough elbow grease will get it off, if it’s just a coating on plastic.

Do beware, however, that you may want to dilute the alcohol to some degree, or simply use a lower concentration form of it. Too strong and it may eat at the underlying plastic just as much as the coating and ruin it.

If the Otterbox case had a rubberized coating on it to try to improve grip, and with it being 6 years old, there’s a possibility it’s the culprit. You could try ditching the case for a little while, and/or getting a new case and swapping them out, clean the surfaces again and see if you feel the stickiness again after handling your phone and other stuff.

However, often with those rubberized coatings, the degradation (when severe enough to feel sticky) is more immediately apparent and you’d be more apt to avoid touching anything else afterward. Also in my experience I don’t recall it transferring to other surfaces much, but then again when I dealt with it I noticed ASAP and cleaned my hands right away.

This is buried toward the bottom of the release notes so I’m bringing it up here:

Added instance-level default sort type

Any admins out there considering changing their instance sort settings or asking people on their instance if they’d like this changed, given that we can individually set sorting anyway? Taking into account the inclination of people to never adjust default settings (I remain deeply curious about this tendency, as an aside), I think it might be worth at least bringing up to one’s instance community.

If they decide they want it to remain the same, all good, and even better, it raises some people’s awareness that they can change it themselves.

Appreciate the adjustments and responsiveness! Gave it another try after this and the different formatting hit the spot! Still need to use more to see more finely tuned results, but dig the idea.

Also as others have already said plenty, would be cool to see this cleaned up for an open source release. If you’d like to see how some others are handling a sorta similar idea but with RSS feeds, you might look to Nunti for ideas on how to approach it.

Little feedback on the UI from taking a peek at this.

When I went into settings and adjusted post display style from card to anything else, it wasn’t clear to me that this wouldn’t apply to the new For You feed, which left me confused and less inclined to use it. I still gave it a try to make sure I wasn’t missing anything and to see how much the feed seemed to change with some light interaction, but I think you’d need to use it more than I did to see an effect.

Problem being: display settings not applying to the For You feed means I’m not going to use it much with the default card view.

Second part is that there was some comment display lag as I looked through posts, so if I looked at a post about cats with cat-related comments, those comments would linger and appear for a moment under a different post about possums. It’s just long enough to be noticeable, so thought it worth mentioning.

Seeing as this thread is still active, instead of continuing to reply to people throughout, gonna go ahead and put this out here.

If you’re not finding an active community for something (safe for work, that is) or any community whatsoever for your interest, you’re welcome to post about the topics that interest you in !general@lemmy.world till you find enough likeminded people to get a separate community going. This was always allowed tbh, but I’ve tried to make it more explicit and clear that it’s cool.

You’re welcome to post about papers and discuss them over in !general@lemmy.world to try to get this going for more specific communities!

You might give the programming.dev instance a try for the first couple subjects, as they have an open !programming@programming.dev community that may work for them.

Given the absence of specific communities (or active ones so far), if people would like they could start these conversations over in !general@lemmy.world.

I recognize it’s not the same, particularly for getting to those deep dive points you mention with ATLA, but gotta start somewhere, right?

Also I can easily give this go-ahead being one of the mods there. Up to now I’ve hesitated popping into threads like this and pointing people there because I’m not a fan of consolidation, but it’s become apparent some simple meeting area may help to get more niche communities spun off and going.

You might try different media if you haven’t already, as in, instead of pencil/pen and paper, maybe colored pencils or markers. Maybe even try getting some black paper and trying to draw with white color pencils instead.

I’m sure you may have tried a variety of things over the years, so I’m just spitballing, but also if you’re trying to dive into the deep end with more complex drawings, you might revisit and really hone the fundamentals. Fundamentals being like getting clean lines by practicing drawing those over and over till you can get a nice, sharp line (which often isn’t a single pencil/brush stroke!).

Once you have those down you may move on to the simple shapes, squares, triangles, circles, and try to recognize how those are put together for more complex forms. It’s a tough skill to get down, without a doubt (I’m not some proficient artist personally), but it’s just that: a skill that takes not only practice but learning methodologies. One of the toughest parts with drawing is that there’s so many methods to go about it to figure out which helps you improve.

But compare with GOG then. They sell games, you download them with no DRM so you own the download essentially.

This is the model digital media should take, frankly. Anything less may as well be misleading marketing, as far as I’m concerned.

Commenting to indicate my shared interest in this (despite the other comments suggesting the unlikelihood of such an option emerging).

How do you stay in the know about this kind of stuff? I’m curious about all the cool stuff out there I wouldn’t even know I’m curious to find.

I was going to mention YaCy as well if nobody else was, so I can chip in to this somewhat. My method is to keep wondering and researching. In this case it was a matter of being interested in alternative search engines and different applications of peer to peer/decentralized technologies that led me to finding this.

So from this you might go: take something you’re even passingly interested in, try to find more information about it, and follow whatever tangential trails it leads to. With rare exceptions, there are good chances someone out there on the internet will also have had some interest in whatever it is, asked about it, and written about it.

Also be willing to make throwaway accounts to get into the walled gardens for whatever info might be buried away there and, if you think others may be interested, share it outside of those spaces.

OP mentioned TiddlyWiki, which I think is a good option if you’re wanting to keep everything together and in a pretty longlasting format, plus there’s a small but creative community that’s made all kinds of interesting plugins for it.

However, if you’re looking for something very small and similarly flexible, there’s also Feather Wiki. Outside of these two, another person already mentioned it but there’s Zim, which may feel a little more comfortable to use as it’s separate desktop software from your browser.

I’ve not made anything with Feather Wiki, but I’ve dabbled with TiddlyWiki and Zim and liked both for different reasons. TW for possibility of sharing/publishing in a nice looking format, and Zim for linking together different offline notes and files (it can also export to bare html which you may then make look nicer with some CSS).

Lastly there’s also Zettlr that I’ve only just started playing around with. I think it may work a little better than Zim in terms of handling offline note sorting and linking files, but I’m not sure yet.

Despite its name, Bookstack isn’t an ebook organizer or ebook organizing server software, it’s more in line with a wiki or personal knowledge organizer software.

I inadvertently found myself coming across software you might sorta like @Spiffyman@slrpnk.net in the form of Zettlr. It’s FOSS, uses Markdown formatting, and is able to export to a variety of different formats.

Downsides are that there’s currently no mobile app, nor plugin/extension support, so the base software is what you get. Nevertheless, it’s a very fully featured piece of software from what I can tell and has pretty good documentation to help learn your way around it. Bonus as well is that it’s cross-platform, so you can run it across different OSes on desktop.

Edit:
Also OP, if you’re really fond of TiddlyWiki but want more guidance on making it more structured, you might look through these notes. TiddlyWiki is really cool, however it certainly takes some getting used to with its style.

[…] but the profitable parts (algorithmic indexer and the app view with advertisements) are very much still in the hands of BlueSky the company.

Yeah, we’ll have to see if/when they fully enable third parties to run their own indexers and app views to see how committed they are to all this, and even then as the thread you linked indicates, there would remain many questionable architectural problems to AuthTransfer.

I came away from reading over the AuthTransfer protocol and its handling of moderation/enabling users with a very major sense of, “We outsource almost everything!”

As L. Rhodes writes:

[…] One effect of ATproto’s structure is to multiply the number of administrative relationships for which each user must decide for themselves—often on little to no information—who deserves their trust. The complexity of its infrastructures seems like it would sometimes make it difficult to assess when that trust has been betrayed, and by whom.

So Bluesky may redistribute some technical power from host admins to users, but it also gives them much more to navigate. It makes their need for power more desperate, and I’m not at all sure that the power trickling down to them through those other layers of infrastructure will be sufficient to the need. No doubt many will compensate by sticking to the parts of the network operated by Bluesky itself—apparent choice, de facto lock-in.

Yes, however without experience with Lemmy’s implementation, it wasn’t clear what the differences were. From what I’ve read of Lemmy’s basic implementation, i.e. submit a reason with your registration/application, this didn’t sound that far from it.

As I read it, Pixelfed’s request for more information form is a good addition (better than the awkward roundabout way you’d have to handle it otherwise, as I think I recall seeing come up with Lemmy), albeit as it’s optional we’ll have to see how well it’s used in practice.

Is there something more to it that’s not highlighted in the linked blog post?