Randomly on my laptop screen this appears and debian just freezes. Sometimes these vertical lines don’t appear and system freezes anyway. Its just random. How do i identify if this is hardware or software issue? and then how to identify exact piece of hardware or software causing this problem.
This looks like a hardware issue to me.
RAM or Video card issue. Are you SURE the entire machine actually locks up, or just the display? Try ssh’ing into the machine when this happens to see if it’s actually staying alive, though the display stops working.
yeah, entire machine locks up. Yeah have tried ssh’ing from mobile and it was stuck one time when i did that during a freeze. have replugged RAM let’s see if system freezes again,
May just be bad RAM as well on a 12 year old machine. Should be cheapish to replace. Try running a memtest
Idk how useful this is but that looks like when i had bad RAM, or like when RAM becomes unseated. You could try reseating your RAM, YMMV.
yeah probably this can be an issue.
deleted by creator
yeah, I have just reseated the RAM lets see if it fixed the problem,
It’s not happening when you try to initiate sleep mode, is it? I have a computer that only ever does something like this when I try to use sleep. I’ve basically just stopped using that feature because nothing I tried ever fixed it. Works completely fine otherwise.
sleep works fine.
What GPU and driver are you using? Looks gpu driver related to me.
| What GPU and driver are you using? Looks gpu driver related to me.
Subsystem: Apple Inc. 3rd Gen Core processor Graphics Controller [106b:00fa] Flags: bus master, fast devsel, latency 0, IRQ 46 Memory at a0000000 (64-bit, non-prefetchable) [size=4M] Memory at 90000000 (64-bit, prefetchable) [size=256M] I/O ports at 2000 [size=64] Expansion ROM at 000c0000 [virtual] [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI]) Subsystem: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:7270]```That seems VERY important to note. Is that an Apple m3?
nope this is macbook pro 2012
Ok. Please add these infos, also the ones you added in comments, to your main post.
Otherwise you need to understand that not many people can help you
Oh that makes sense. Thanks!
What GPU and driver are you using? Looks gpu driver related to me.
for context, i have been using debian 12 for last 6 months perfectly fine. Its just from last week my laptop is randomly freezing and then I have to hard reset it everytime this happens, (pressing power off button for few seconds to force shutdown).
You really should include the hardware you’re using in the main post. It’s common courtesy when requesting help from people.
Oh yeah i totally agree!
I have a similar issue specific to my Intel graphics, debian 12, and kde. It’s fixed in the newer kernel in debian Trixie. In my case I was able to set up a keybind to ctrl-alt-backspace which kills the graphics server. I have to catch it quick or it’ll lock up completely, but it’s something to try. I’m on 15 days uptime now I’ve probably had to do that about 5 times.
Oh, thats very helpful. Thanks
Np. Trying to find the exact page but I just checked the last logs in journalctl after each crash to determine that’s what it was. If you search Wayland + kwin + Intel GPU crash you get lots of hits. It can be fixed but now that I know it’s very specific to my setup and already fixed in future versions I’m not so worried.
yeah with what other people have said it’s most likely bad or unseated RAM
have just replugged RAM and lets see if system gets frozen again.
that’s good then! i had this same issue (randomly freezing after turning it om for some time) though new RAM ended up fixing it
Hmmm. I have also installed linux mint xfce from scratch. So far so good. It stuck only one time since this install. And its been 5 days or so i guess.
